How to Fix Sliding Closet Doors – The doors sliding rubbing together can accelerate wear of wood, in addition to generating a sound unpleasant. These doors are also more difficult to open due to friction generated. You can usually remedy this if you make some adjustments in how they are placed. Look at the inside of the doors to make sure that the mechanisms that allow these dangle are set appropriately within the upper rail. Inspect the base of the doors to make sure that they are properly placed in the lower brackets or rails. If any of the doors is a little outside the rails, you may rub together.
Inspect the rail itself to determine its condition. A bent rail can cause the door rubbing or touching each other. Replace the track of one or two doors that are bent or damaged and not allow it to slide freely. Remove the how to fix sliding closet doors of the rails. Sand the edges and any other part of these rub against other parts of wood. A smooth surface allows the wood to slide more smoothly than a rough surface.
Apply a lubricant paste, which is available in a carpentry shop. Rub the lubricant on the upper and lower edges as well as in other areas of the door that rub against other wood. The lubricant helps the doors to slide with less friction. Place the how to fix sliding closet doors back on the rails. If the supports allow, adjusts the height of the doors to reduce friction, particularly if a rug interferes with the sliding thereof.