Types of closet doors – Installing new cabinet doors can give your bedroom a new look without expensive renovations. Painted cabinet doors allow you to accentuate the color scheme of the room. It may also be necessary to replace the existing cabinet doors due to damage to the door or tracks. Follow this guide and you will have your new cabinet doors installed in minutes.
Install new types of closet doors, Measure your old cabinet’s doors so you know what size to buy replacement doors. You can buy prefabricated doors that have already been finished and painted, or you can buy unfinished doors and customize them to match the color scheme of your home. If you are finishing your own cabinet doors must be completely dry before hanging. Lift one of the ancient gates above and pull the bottom edge toward you until you leave the track. Use a screwdriver to loosen the screws and remove the track at the top of the door. Measure the old track before discarding so you know how long to cut the new track.
Install types of closet doors, cut the new track with a saw so that is the same length as the old track. Place the track to the top of the door with wood screws. Fully tighten the screws so that the heads will roll out of the way of the door. Set the rollers inside the top edge of the door, if necessary. Some cabinet doors come with pre-installed rollers. Lift one of the doors and slide the rollers on the track. As in step 2, you may need to release a locking lever or place the rollers in a particular section of the track cut.